Vallox 096 MC | SE | MV filters
Vallox 096 MC | SE | MV filters are designed to filter the supply and extract air of the Vallox 096 MC | SE | MV ventilation unit. The set (Vallox filter set no. 27) includes one F7 panel filter and two G4 filter media sheets. The F7 filter measures 225 × 194 × 96 mm and the G4 filter media sheets measure 225 × 194 mm and 350 × 138 mm.
The right filters help reduce the amount of dust and other airborne particles entering the ventilation system. Before ordering, check your unit’s exact model designation and compare the filter dimensions.
Filter set specifications
- Compatible unit: Vallox 096 MC | SE | MV (R and L models)
- Set contents: 3 filters
- Supply air filter: F7 panel filter
- Supply air filter dimensions: 225 × 194 × 96 mm
- G4 filter media sheet: 2 pcs
- G4 filter media sheet dimensions: 225 × 194 mm and 350 × 138 mm
More information and FAQ
Open a question to read more.
How do I check that the Vallox 096 MC | SE | MV filters fit?
Before ordering, make sure your ventilation unit model is Vallox 096 MC | SE | MV. The F7 filter in this set measures 225 × 194 × 96 mm and the G4 filter media sheets measure 225 × 194 mm and 350 × 138 mm. We recommend comparing them with your current filters, as filters for different Vallox models may not be interchangeable.
How do I install the Vallox 096 MC | SE | MV filters?
The set includes one F7 panel filter and two G4 filter media sheets. The F7 filter cleans the fresh outdoor air, and the G4 sheets capture coarser dust.
Unplug the unit before replacing the filters. Check the correct installation position of the filters and the airflow direction marked on the filter, and follow the unit’s maintenance instructions. Also see the Vallox 096 MC | SE | MV filter replacement guide (PDF).
In the Vallox 096 MC | SE | MV unit, one G4 sheet goes on top of the F7 filter: place it flat and without wrinkles on the side of the F7 filter where the air comes in, and slide the F7 filter with the sheet into place. The second G4 sheet is for the extract air. Outdoor air comes in from the top and flows through the G4 sheet and the F7 filter down into the heat exchanger, so the arrow on the F7 filter must point downwards. In the left-hand (L) model everything is mirrored; the filters are the same.
How often should ventilation filters be replaced?
Ventilation filters should generally be replaced every 6 months. In dustier environments, near busy roads or where air pollution is higher, more frequent replacement may be needed.
Regular maintenance helps keep indoor air quality good and your ventilation unit running efficiently. Also follow the manufacturer’s maintenance recommendations.
Why is it important to use the right filters for your ventilation unit?
Filters of the correct size and filter class help keep your ventilation unit working properly and filter the air effectively. Unsuitable or heavily soiled filters can increase air resistance and reduce the performance of the ventilation system.
See other Vallox filters
If your ventilation unit is a different model, browse the Filt.ee range of Vallox filters. On the category page you’ll also find filter sets for other Vallox ventilation units.
Why choose our air filters?
Exact dimensions
Made to the unit manufacturer’s specified dimensions, accurate to the millimetre, so no air can bypass the filter.
Quality materials
Quality filter media ensures a long filter life and good filtration throughout its use.
ISO 16890 compliance
All our air filters comply with the international ISO 16890 standard.
Read more →Large filter area
A narrow frame leaves more surface for filtration. If the original filter has a seal, ours has one too.
We’re here to help
If the filter doesn’t fit or there’s a problem with your order, write to us and we’ll find a solution.
Returns →
About replacing air filters
Three short guides to help you replace your filters at the right time and in the right way.





