How to replace air filters?
Switch off the unit, open the front panel, take out the old filters and fit the new ones the right way round – follow the airflow arrow on the filter.
Right after you place a filter order, we’ll also email you a PDF guide for replacing the filters.
Identify your unit model
Before buying new filters, find out the make and model of your ventilation unit. You’ll find it in the unit’s user manual, on the side of the unit or on the filter currently in use.
Get everything you need ready
- new filters for your unit
- a screwdriver or spanner
- a vacuum cleaner with a narrow nozzle
- a damp cloth for cleaning
Replacing filters step by step
- 1Switch off the unitUnplug the unit or switch off the ventilation unit’s circuit breaker in the electrical panel.
- 2Open the front panelThe panel is usually held by wing fasteners that need to be turned to the open position. Some units require a screwdriver or spanner.
- 3Remove the old filtersNote which way the air flows through the filter. The direction is marked on the filter with an arrow.
- 4Clean the inside of the unitRemove dust from the filter slot and around it with a vacuum cleaner and a damp cloth.
- 5Fit the new filtersPlace the filters firmly in the slot so that the airflow arrow points in the right direction.
- 6Fasten the front panelMake sure all fasteners are locked and the panel is properly attached to the unit.
- 7Switch on the unitCheck that the unit runs normally and makes no unusual noises – these may indicate incorrect installation.
- 8Dispose of the old filtersIn Estonia, used air filters go in mixed municipal waste.
Filters of different classes? The F7 filter goes on the supply air side and the M5 filter on the extract air side.
Remember
Don’t want to keep track of replacement dates?
Join Filt Club when ordering – we’ll email you when it’s time to replace your filters.
Read about Filt ClubHow often to replace filters?Find filters for your unit
We sell filters for the three most popular ventilation unit brands in Estonia.




