Komfovent Domekt R 250 F C6 | REGO 250 PE filters
Domekt R 250 F C6 | REGO 250 PE filters are designed to filter the supply and extract air of the Komfovent Domekt R 250 F C6 | REGO 250 PE ventilation unit. The set includes two panel filters: one F7 supply air filter and one M5 extract air filter. Both filters measure 278 × 258 × 46 mm.
The right filters help reduce the amount of dust and other airborne particles entering the ventilation system. Before ordering, check your unit’s exact model designation and compare the filter dimensions.
Filter set specifications
- Compatible unit: Komfovent Domekt R 250 F C6 | REGO 250 PE
- Set contents: 2 filters
- Supply air filter: F7 panel filter
- Supply air filter dimensions: 278 × 258 × 46 mm
- Extract air filter: M5 panel filter
- Extract air filter dimensions: 278 × 258 × 46 mm
More information and FAQ
Open a question to read more.
How do I check that the Domekt R 250 F C6 | REGO 250 PE filters fit?
Before ordering, make sure your ventilation unit model is Komfovent Domekt R 250 F C6 | REGO 250 PE. Both filters in this set measure 278 × 258 × 46 mm. We recommend comparing them with your current filters, as filters for different Domekt models may not be interchangeable.
How do I install the F7 and M5 ventilation filters?
The filter set contains two filters with different purposes. The F7 filter cleans the fresh outdoor air coming in, and the M5 filter cleans the air extracted from the rooms.
Switch off the ventilation unit before replacing the filters. Check the correct installation position of the filters and the airflow direction marked on them, and follow the unit’s maintenance instructions. Also see the F7 and M5 filter installation guide (PDF).
In the Domekt R 250 F C6 unit, air flows from the connections towards the centre of the unit, so the arrow on the filter frame must point towards the centre of the unit. The filters are behind the service hatch and are slightly tilted: the F7 filter goes on the outdoor air (ODA) side at the bottom left and the M5 filter on the extract air (ETA) side at the top right. In the right-hand (R2) and left-hand (L2) versions the filters are mirrored. In both cases the arrow points towards the centre.
How often should ventilation filters be replaced?
Ventilation filters should generally be replaced every 6 months. In dustier environments, near busy roads or where air pollution is higher, more frequent replacement may be needed.
Regular maintenance helps keep indoor air quality good and your ventilation unit running efficiently. Also follow the manufacturer’s maintenance recommendations.
Why is it important to use the right filters for your ventilation unit?
Filters of the correct size and filter class help keep your ventilation unit working properly and filter the air effectively. Unsuitable or heavily soiled filters can increase air resistance and reduce the performance of the ventilation system.
See other Komfovent filters
If your ventilation unit is a different model, browse the Filt.ee range of Komfovent filters. On the category page you’ll also find filter sets for other Domekt ventilation units.
Why choose our air filters?
Exact dimensions
Made to the unit manufacturer’s specified dimensions, accurate to the millimetre, so no air can bypass the filter.
Quality materials
Quality filter media ensures a long filter life and good filtration throughout its use.
ISO 16890 compliance
All our air filters comply with the international ISO 16890 standard.
Read more →Large filter area
A narrow frame leaves more surface for filtration. If the original filter has a seal, ours has one too.
We’re here to help
If the filter doesn’t fit or there’s a problem with your order, write to us and we’ll find a solution.
Returns →
About replacing air filters
Three short guides to help you replace your filters at the right time and in the right way.







