Flexit UNI 3 filters
Flexit UNI 3 filters are designed to filter the supply and extract air of the Flexit UNI 3 ventilation unit. The set includes two identical F7 filters: one for the supply air and one for the extract air. Both filters measure 419 × 192 × 31 mm.
The right filters help reduce the amount of dust and other airborne particles entering the ventilation system. Before ordering, check your unit’s exact model designation and compare the filter dimensions.
Filter set specifications
- Compatible unit: Flexit UNI 3
- Set contents: 2 filters
- Supply air filter: F7 filter
- Supply air filter dimensions: 419 × 192 × 31 mm
- Extract air filter: F7 filter
- Extract air filter dimensions: 419 × 192 × 31 mm
More information and FAQ
Open a question to read more.
How do I check that the Flexit UNI 3 filters fit?
Before ordering, make sure your ventilation unit model is Flexit UNI 3. Both filters in this set measure 419 × 192 × 31 mm. We recommend comparing them with your current filters, as filters for different Flexit UNI models may not be interchangeable.
How do I install the Flexit UNI 3 filters?
The filter set contains two identical F7 filters. One cleans the fresh outdoor air (supply) and the other cleans the air extracted from the rooms (extract).
Switch off the ventilation unit before replacing the filters. Check the correct installation position of the filters and the airflow direction marked on them, and follow the unit’s maintenance instructions. Also see the Flexit UNI 3 filter replacement guide (PDF).
In the Flexit UNI 3 unit, air flows through the filters towards the rotor, so the arrow on the filter frame must point towards the rotor. The filters stand upright next to the rotor behind the unit’s door and have a blue handle. On the left-hand model the supply air filter is on the left and the extract air filter on the right; on the right-hand model it is the other way round. The arrow on the left filter points to the right and the arrow on the right filter points to the left. Both filters are identical F7 filters.
How often should ventilation filters be replaced?
Ventilation filters should generally be replaced every 6 months. In dustier environments, near busy roads or where air pollution is higher, more frequent replacement may be needed.
Regular maintenance helps keep indoor air quality good and your ventilation unit running efficiently. Also follow the manufacturer’s maintenance recommendations.
Why is it important to use the right filters for your ventilation unit?
Filters of the correct size and filter class help keep your ventilation unit working properly and filter the air effectively. Unsuitable or heavily soiled filters can increase air resistance and reduce the performance of the ventilation system.
See other Flexit filters
If your ventilation unit is a different model, browse the Filt.ee range of Flexit filters. On the category page you’ll also find filter sets for other Flexit ventilation units.
Why choose our air filters?
Exact dimensions
Made to the unit manufacturer’s specified dimensions, accurate to the millimetre, so no air can bypass the filter.
Quality materials
Quality filter media ensures a long filter life and good filtration throughout its use.
ISO 16890 compliance
All our air filters comply with the international ISO 16890 standard.
Read more →Large filter area
A narrow frame leaves more surface for filtration. If the original filter has a seal, ours has one too.
We’re here to help
If the filter doesn’t fit or there’s a problem with your order, write to us and we’ll find a solution.
Returns →
About replacing air filters
Three short guides to help you replace your filters at the right time and in the right way.





