Tootekirjeldus
Vallox 140 SE | 150 SE filters
Vallox 140 SE | 150 SE filters are designed to filter the supply and extract air of the Vallox 140 SE | 150 SE ventilation unit. The set (Vallox filter set no. 16) includes a F7 panel filter and two G4 filter media sheets. The F7 filter measures 545 × 272 × 48 mm and the G4 filter media sheets measure 546 × 233 mm.
The right filters help reduce the amount of dust and other airborne particles entering the ventilation system. Before ordering, check your unit’s exact model designation and compare the filter dimensions.
Filter set specifications
- Compatible unit: Vallox 140 SE | 150 SE (R and L models)
- Set contents: 3 filters
- Supply air filter: F7 panel filter
- Supply air filter dimensions: 545 × 272 × 48 mm
- G4 filter media sheet: 2 pcs
- G4 filter media sheet dimensions: 546 × 233 mm
More information and FAQ
Open a question to read more.
How do I check that the Vallox 140 SE | 150 SE filters fit?
Before ordering, make sure your ventilation unit model is Vallox 140 SE | 150 SE. The F7 filter in this set measures 545 × 272 × 48 mm and the G4 filter media sheets measure 546 × 233 mm. We recommend comparing them with your current filters, as filters for different Vallox models may not be interchangeable.
How do I install the Vallox 140 SE | 150 SE filters?
The set includes a F7 panel filter and two G4 filter media sheets. The F7 filter cleans the fresh outdoor air, and the G4 sheets capture coarser dust.
Unplug the unit before replacing the filters. Check the correct installation position of the filters and the airflow direction marked on the filter, and follow the unit’s maintenance instructions. Also see the Vallox 140 SE | 150 SE filter replacement guide (PDF).
In the Vallox 140 SE | 150 SE unit, the filters are removed from the unit together with the heat exchanger. The two G4 sheets are laid flat and without wrinkles on the frame and the mesh. The arrow on the F7 filter must point in the same direction as on the old filter: away from the G4 sheet, into the unit. So before removing the old filter, check where its arrow points or take a photo with your phone. The left-hand and right-hand (L and R) models are mirror images of each other; the filters are the same.
How often should ventilation filters be replaced?
Ventilation filters should generally be replaced every 6 months. In dustier environments, near busy roads or where air pollution is higher, more frequent replacement may be needed.
Regular maintenance helps keep indoor air quality good and your ventilation unit running efficiently. Also follow the manufacturer’s maintenance recommendations.
Why is it important to use the right filters for your ventilation unit?
Filters of the correct size and filter class help keep your ventilation unit working properly and filter the air effectively. Unsuitable or heavily soiled filters can increase air resistance and reduce the performance of the ventilation system.
See other Vallox filters
If your ventilation unit is a different model, browse the Filt.ee range of Vallox filters. On the category page you’ll also find filter sets for other Vallox ventilation units.







