Tootekirjeldus
Vallox 101 MC | MV filters
Vallox 101 MC | MV filters are designed to filter the supply and extract air of the Vallox 101 MC | MV ventilation unit. The set (Vallox filter set no. 31) includes a F7 panel filter and two G4 filter media sheets. The F7 filter measures 350 × 220 × 48 mm and the G4 filter media sheets measure 350 × 220 mm and 335 × 170 mm.
The right filters help reduce the amount of dust and other airborne particles entering the ventilation system. Before ordering, check your unit’s exact model designation and compare the filter dimensions.
Filter set specifications
- Compatible unit: Vallox 101 MC | MV (R and L models)
- Set contents: 3 filters
- Supply air filter: F7 panel filter
- Supply air filter dimensions: 350 × 220 × 48 mm
- G4 filter media sheet: 2 pcs
- G4 filter media sheet dimensions: 350 × 220 mm and 335 × 170 mm
More information and FAQ
Open a question to read more.
How do I check that the Vallox 101 MC | MV filters fit?
Before ordering, make sure your ventilation unit model is Vallox 101 MC | MV. The F7 filter in this set measures 350 × 220 × 48 mm and the G4 filter media sheets measure 350 × 220 mm and 335 × 170 mm. We recommend comparing them with your current filters, as filters for different Vallox models may not be interchangeable.
How do I install the Vallox 101 MC | MV filters?
The set includes a F7 panel filter and two G4 filter media sheets. The F7 filter cleans the fresh outdoor air, and the G4 sheets capture coarser dust.
Unplug the unit before replacing the filters. Check the correct installation position of the filters and the airflow direction marked on the filter, and follow the unit’s maintenance instructions. Also see the Vallox 101 MC | MV filter replacement guide (PDF).
In the Vallox 101 MC | MV unit, one G4 sheet goes on top of the F7 filter: place it flat and without wrinkles on the side of the F7 filter where the air comes in, and slide the F7 filter with the sheet into place. The second G4 sheet is for the extract air. Outdoor air comes in from the top and flows through the G4 sheet and the F7 filter down into the heat exchanger, so the arrow on the F7 filter must point downwards. In the left-hand (L) model everything is mirrored; the filters are the same.
How often should ventilation filters be replaced?
Ventilation filters should generally be replaced every 6 months. In dustier environments, near busy roads or where air pollution is higher, more frequent replacement may be needed.
Regular maintenance helps keep indoor air quality good and your ventilation unit running efficiently. Also follow the manufacturer’s maintenance recommendations.
Why is it important to use the right filters for your ventilation unit?
Filters of the correct size and filter class help keep your ventilation unit working properly and filter the air effectively. Unsuitable or heavily soiled filters can increase air resistance and reduce the performance of the ventilation system.
See other Vallox filters
If your ventilation unit is a different model, browse the Filt.ee range of Vallox filters. On the category page you’ll also find filter sets for other Vallox ventilation units.







